Proper management of an electrical system is a basic requirement considering just how a small mistake can turn out to be the cause of a disaster. Malfunctions can be caused by human errors during installation, vandalism or damages from physical elements. The only way out is periodic inspection with the aim or reveling flaws, points of weaknesses and other potential disasters well in advance for early repair. This process does not have to be time consuming and labor intensive as is normally the case when physical testing is done, instead it is prudent to resort to electrical infrared inspection that is highly effective and a significantly cheaper alternative.
The general recommendation is that all parts of electrical system that are exposed to vibrations and or any other movements are inspected at least every six months while the rest are inspected on annual basis. For the system exposed to earthquakes, frozen winter conditions, very strong winds and tsunamis, there is a need for more frequent testing.
In normal distribution, infrared surveys should be conducted on annual basis and is considered part of a regular preventive and maintenance program. This form of testing makes it possible to inspect a large number of components within the shortest time possible locating the faulty items in the system that could not be located through the physical survey or testing.
The devices that requires infrared surveys are the bus ducts, the distribution center, the distribution panels, receptacle panel, the transformers, lighting system, switchgears, disconnects and other components that make up the system. If well done, the uninterruptable power supply can be achieved as there is no need to shut down the system. The process of inspection takes place under the normal load without any disturbance to normal supply.
This is the best way in terms of cost and time to inspect almost all electrical components. The most common components that need regular inspection include transformers, switchgear, bus ducts, power correcting banks, variable frequency drives, the disconnects, distribution centers and panels, sub-feed panels, the motor control centers, the uninterruptable power supplies, the lighting and the receptacle panels among several other components.
Given that thousands of devices can be tested within hours, it has proven to be more convenient, highly effective and very efficient method of maintaining electrical system replacing the physical inspection. It is also endorsed by the National Fire Protection Association and the InterNational Electrical Testing Association among other bodies that now advocates for its use.
There are several benefits that comes with infrared surveys among which include the ability to pinpoint the real hot spot, the reduced down time, elimination of unplanned power outages, ability to cut down on the cost of maintaining electrical system and minimization of possible hazards and related disasters. This all translates to an efficient and reliable electrical system with reduced cost of power supply.
It is important to trust the surveying services to a company that has expert engineers, the necessary machinery for the job and well proven track record in order to enjoy the full benefits of this new technology.
The general recommendation is that all parts of electrical system that are exposed to vibrations and or any other movements are inspected at least every six months while the rest are inspected on annual basis. For the system exposed to earthquakes, frozen winter conditions, very strong winds and tsunamis, there is a need for more frequent testing.
In normal distribution, infrared surveys should be conducted on annual basis and is considered part of a regular preventive and maintenance program. This form of testing makes it possible to inspect a large number of components within the shortest time possible locating the faulty items in the system that could not be located through the physical survey or testing.
The devices that requires infrared surveys are the bus ducts, the distribution center, the distribution panels, receptacle panel, the transformers, lighting system, switchgears, disconnects and other components that make up the system. If well done, the uninterruptable power supply can be achieved as there is no need to shut down the system. The process of inspection takes place under the normal load without any disturbance to normal supply.
This is the best way in terms of cost and time to inspect almost all electrical components. The most common components that need regular inspection include transformers, switchgear, bus ducts, power correcting banks, variable frequency drives, the disconnects, distribution centers and panels, sub-feed panels, the motor control centers, the uninterruptable power supplies, the lighting and the receptacle panels among several other components.
Given that thousands of devices can be tested within hours, it has proven to be more convenient, highly effective and very efficient method of maintaining electrical system replacing the physical inspection. It is also endorsed by the National Fire Protection Association and the InterNational Electrical Testing Association among other bodies that now advocates for its use.
There are several benefits that comes with infrared surveys among which include the ability to pinpoint the real hot spot, the reduced down time, elimination of unplanned power outages, ability to cut down on the cost of maintaining electrical system and minimization of possible hazards and related disasters. This all translates to an efficient and reliable electrical system with reduced cost of power supply.
It is important to trust the surveying services to a company that has expert engineers, the necessary machinery for the job and well proven track record in order to enjoy the full benefits of this new technology.
About the Author:
If you need information about electrical infrared inspection, pay a visit to the web pages here today. You can see details at http://www.infraredscanningservice.com now.
No comments:
Post a Comment